How to properly fire up a new wood-burning stove in a bathhouse or sauna for the first time. Video

🔥📜Tips - Start your sauna right!

🔥📜 ThermowoodTips: The first heating of a new wood stove is the art of creating ideal steam for the further safe operation of your bathhouse!

🔥📜 The stove is painted with silicone heat-resistant enamel, complete polymerization of which occurs during the first heating of the stove with the release of a disappearing odor.

🔥📜It is advisable to carry out the first heating of the stove outdoors without stones!

🔥📜But if you already have a stove installed, follow the following tips.

• Don’t forget to take the stove passport out of the stove and read the instructions carefully!
• Make sure the oven is in place and ready to use.
• Remove the protective film from the stove chimney pipes.
• Open all windows, doors, and release valves to provide maximum ventilation to extract smoke and ensure adequate air circulation.
• To ignite the stove, pull out the ash pan 80-100 mm.
• Light paper and preferably dried wood, spreading them evenly in the stove.
• Wait until a steady stream of smoke forms before closing the oven door.
• After the fuel burns well, set the ash pan to the position corresponding to the currently required heat output. The position of the ash pan is determined experimentally.
• Increase the intensity of the heat, but be careful not to overheat the oven.
• Before adding fuel, switch the stove to high-burning mode by pulling out the ash pan.
• Wait until the smell is completely gone, and only then enter the bathhouse.
• If during the first heating the smell is not completely obtained, you need to repeat it 1-2 more times until it burns out completely.
• The stones must be placed in the oven after the odor has completely escaped, so that when they burn out they do not contaminate it.
• Before each new fire of the stove, empty the ash pan of ash.
• Checking the stove and chimney, as well as cleaning them, should be carried out at least once every two months.

🔥📜In the world of baths and saunas, First Protopka is a real art! Stay safe and enjoy a clean, cozy fire with your new stove!

🔥📜With ThermowoodTips, join the owners of ideal vapors and an atmosphere of comfort in your bathhouse! 🚀🌲

🔥📜There may be minor difficulties during the first heating of a new stove and ways to eliminate them:

1. The new stove does not light, it smokes, there is no draft. Awaken cravings by burning paper and shavings.
2. Insufficient temperature. Use only dry firewood.

All other faults require calling a technician.

🔥📜 When operating the stove it is not allowed:

1. entrust the care of the stove to young children;
2. place fuel and other flammable substances and materials directly in front of the combustion opening;
3. dry and place clothes, firewood and other flammable items and materials on the stove;
4. use flammable liquids to light the stove;
5. fire with coal, coke and gas;
6. load firewood into the stove whose length exceeds the size of the firebox;
7. burn wood in the furnace passage with the firebox removed;
8. light the stove with the firebox door open;
9. use ventilation and gas ducts as chimneys;
10. use asbestos-cement and ceramic pipes for chimneys.

🌿✨ ThermowoodTips from SaunaManufacturer Thermowood Production! 📞 (+38) 067-201-50-50 🌟 Viber, WhatsApp, Telegram.